Set Tile Like A Professional



easier install

easier removal

Our patented spacer is a dramatic improvement over the traditional spacers sold in the marketplace today. A major benefit of The TAVY Tile Spacer is that the circular design prevents the spacer from bottoming out into the cement or adhesive making removal extremely easy. Installers can use a 1/32 inch spacer as easily as they would use a 3/8 inch spacer. A traditional spacer must be painstakingly removed by picking each one out from between every tile! NEVER AGAIN will an installer have to get on his hands and knees to remove spacers with the TAVY Tile Spacer.

Another benefit is the versatile, two sided design of the TAVY Tile Spacer which allows for an installer to use both sides of our spacer. The cross side can be used at any four corner intersection and the straight edge side can be used at any location a spacer is required.

The TAVY Tile Spacer will soon become the preferred tool for every installation. By making tile installation easier, DIY'ers (Do-It-Yourselfers) will be more tempted to tackle a project because they will be more confident that their job will look like that of a professional.


 TAVY Tile Spacers data sheet


save spacers

save time

“I’m writing to you about your spacers. I have been in the tile and marble business in the Palm Beach County, FL area since childhood, and have seen many methods of laying tile. I was introduced to using spacers a couple of years ago and got hooked. I found they kept the grout joints uniform and straight, and made it impossible for the tile to move out of place. The problem was removing them. It was difficult to get them out and took a long time. But your product removes with ease. Your spacers don’t drop down in the joints and are easier to handle. To remove, you can brush them out with your feet in no time, then sweep them up. I don’t think there is a better tool to use. Thank you very much.”
Bill Bardash - Contractor - Jupiter, Florida

“In today’s market, any way we can reduce labor cost is a must. Your spacers save time in both installation and next day removal, which translates into cost savings.”
James A. Whitley, III - President - J.A. Whitley Company, Inc. - Greensboro, NC

“We used to have to pull out our spacers with needle nose pliers. Now, we can kick them out or sweep them out with a broom! We used them on Rustic Edge Tile, and they worked great.”
Patrick Colletta - Owner Colletta Tile - Brick, New Jersey

“The NTCA (National Tile Contractors Association, Inc.) met in New Orleans, Louisiana in February 1998 and one of the agenda items was your spacer. The spacers were circulated around the table to approximately 30 members of the NTCA. Their reaction was the same as mine. Your spacer is truly innovative and deals with the major concern of most people in our industry, that of leaving spacers in the grout joint. Congratulations on providing a unique and useful product for the working people.”
Joe A. Tarver - Executive Director NTCA - Jackson, Mississippi

approximately 100 spacers,
also available in bulk packs